Product News

Home/News/Product News
Product News2019-03-18T00:04:39+00:00

Simple is Best – Marking Presses for Visual Inspection

By |August 27th, 2020|Categories: TechTalk|

Over the past 10-15 years the introduction of copper press fittings into the Australian market has made a dramatic impact on the way we go about joining copper tube. With the installation process so easy, sometimes complacency can creep into work habits and in some cases even forgetting to [...]

Health Benefits Copper Water Tube

By |August 27th, 2020|Categories: TechTalk|

Three Key Reasons Why Copper Has Superior Health Benefits 1. ‘Copper has a unique ability to reduce the threat of disease from waterborne bacteria’. Copper, when compared to plastic pipes, has demonstrated superior control of waterborne bacteria. Prior studies have demonstrated the antimicrobial behaviour of copper and the inhibitory [...]

Preventing condensation with insulated Paircoil and PaircoilMAX

By |August 27th, 2020|Categories: TechTalk|

What is ‘dewpoint’?The air surrounding us contains water vapour. The water vapour content of this air can vary greatly, and in general warm air can absorb more water than cold air.As the air near a pipe cools, the air becomes more saturated until it reaches a point where it is [...]

R410a Refrigeration Tube in 0.81 and 0.91 wall thickness

By |August 27th, 2020|Categories: TechTalk|

Did you know? MM Kembla Copper Tubes with diameters 12.70mm and under are available in two wall thicknesses suitable for R410a High-pressure refrigerants, 0.81 wall thickness and 0.91 wall thickness. These products are suited to higher-pressure refrigerant gas and can also be recommended for use with R22, R134a lower [...]

Installation and testing of Medical Gas pipeline systems

By |August 26th, 2020|Categories: TechTalk|

Australian Standard AS2896-1998 states; Materials; Copper tube used in medical gas pipeline systems shall be of ‘as drawn’ seamless tube, manufactured in accordance with AS/NZS 1571. Copper fittings shall be in accordance with ASME B 16.22. All components of the pipeline shall be compatible with oxygen, and shall be [...]

Go to Top